Caster Combinations
Maximizing Caster Efficiency
Maximize manufacturing efficiency with strategic Caster Combinations. Unlock superior equipment design, repair, and refurbishment. Explore top mounting options for optimal results.
Two Swivel, Two Rigid
Two Swivel & Two Rigid Pattern is the most popular configuration used. This combination is the most practical and the most economic design, primarily used for straight and/or long distances and can be used for most loads, depending on the total weight capacity.
Four Swivel
Four Swivel Caster respond instantly to directional change, making limited spaces easy to maneuver. This configuration is recommended for short distances. If the casters are equipped with swivel locks, this mountin gpattern will work for long straight travel.
Four Swivel, Two Rigid
This pattern is designed for heavy loads and long platform trucks. The Two Rigid Casters help to distribute and reduce the load on the swivel casters which maintains good maneuverability and makes steering very easy.
Standard Tilt Mount
The Standard Tilt Mount consists of Four Swivel & Two Rigid Casters. It is designed for heavy load and long platform trucks. The two rigid casters are higher than the four swivel casters. The tilt is most effective when the rigid casters are 1/8" higher than the overall height of the swivel casters. This platform design offers easy maneuverability with higher load capacities.
Diamond Mount
The Diamond Mount uses Two Swivel & Two Rigid Casters. However the rigid casters are set at the sides and the two swivel casters are set at the ends. This makes the platform highly maneuverable, which turns in its own length. The capacity is strictly dependent upon the capacity of the casters required. This mounting pattern is not recommended for ramps.
Diamond Tilt Mount
The Diamond Tilt Mounting uses Two Swivel & Two Rigid Casters. It is designed where the rigid casters are set at the sides and the swivel casters are set at the ends. The tilt is most effective when the rigid caster are 1/8" higher than the overall height of the swivel casters. This makes the platform highly maneuverable, which turns in its own length. The capacity is strictly dependent upon the capacity of the casters required. This mounting pattern is not recommended for ramps.
Three Swivel
The Three Swivel Pattern is found on barrel dollies and small portable machines, which generally require excellent maneuverability. Use caution when selecting the correct caster, as the load is only distributed over three casters rather than the usual four.